The professional laser complex ARAMIS LTR-PRO will allow you to process any configuration of pipes, namely:
- round;
- profile;
- flat-oval and oval pipes;
- corners;
- channel;
- beams / I-beams;
- and other types of pipes.
Optionally, this complex can be equipped with a 3D laser head. This will make it possible to cut pipes of any configuration with the possibility of their complete joining and insertion of a part into a part.
This technology:
- completely eliminate all gaps;
- eliminates production defects;
- will allow to produce parts for manual bending;
- will significantly increase the speed of production of the product, due to the complete elimination of post-processing operations.
For large volumes of pipe processing, your company simply needs a laser tube cutting machine ARAMIS LTR-PRO.
With it, you minimize fixed costs, significantly increase productivity and eliminate waste.
Laser power
| Laser pipe cutting machine | Laser power, w | Maximum section thickness, mm (Steel3) |
| LTR-PRO-1000 | 1000 | Up to 10,0 |
| LTR-PRO-2000 | 2000 | Up to 14,0 |
| LTR-PRO-3000 | 3000 | Up to 16,0 |
| LTR-PRO-4000 | 4000 | Up to 18,0 |
| LTR-PRO-5000 | 5000 | Up to 22,0 |
Details
| Type of laser | Ytterbium fiber |
|---|---|
| Beam transmission | Through fiber |
| Focused radiation spot width | 0.07-0.15 mm |
| Average radiation power | 1000 — 5000 W |
| Kinematic diagram | Portal, the sheet is motionless |
| Pipe processing area, mm | 6000×200; 6000×500 |
| Coordinate Axes | X, Y, C — linear, V1, V2 — synchronous rotation coordinates, Z vertical |
| Workpiece body shape | Round, profile, flat-oval and oval pipes, angle, channel, beam / I-beam |
| X, Y, C coordinate drive type | Linear Drive |
| Drive type Z, V coordinates | Servo |
| Cartridge | 4-jaw, self-centering, with automatic clamping / unclamping |
| Outside diameter of processed round pipes (blanks) with installation in the chuck, (min..max), mm | 10 – 200, 10 — 500 |
| Length of pipes (blanks) installed in the chuck (min..max), mm | 500 — 6000 |
| Maximum length of the obtained workpiece, mm | 5800 |
| Supply voltage | ~ 380 ± 18%; 50 Hz; 3-phase |
