| Pipe diameter (standard) | 50 – 500 mm |
|---|---|
| Cutting length (Working length) | Basic length: 1.000 mm |
| Working width at Y-cantilever | ZINSER 1306 : ~ 500 mm (with one tool) |
| Equipment | 1 torch with height adjustment; Oxy-fuel / Plasma / Drilling |
| Option | Pipe support system consisting of a guide track and height adjustable dollie |
| Track width (B): | 2.100 / 2.600 / 3.100 / 3.600 / 3.850 / 4.100 mm |
|---|---|
| Machine width (A): | Track width (B) + 2.200 mm |
| Working width with 1-3 torches: | Track width (B) – 600 mm |
| Machine lenght (C): | Working length (D) + 2.000 mm |
| Max. number of torch carriers | 4 |
| Cutting thickness (with standard torch): | up to 200 mm |
| Drives: | AC-servo drives / planetary gears |
| Input voltage | 3 x 400 V / 50 Hz |
| Cantilever / extension (E): | 1.500 mm |
| Type of laser | Ytterbium fiber |
|---|---|
| Beam transmission | Through fiber |
| Focused radiation spot width | 0.07-0.15 mm |
| Average radiation power | 1000 — 5000 W |
| Kinematic diagram | Portal, the sheet is motionless |
| Pipe processing area, mm | 6000×200; 6000×500 |
| Coordinate Axes | X, Y, C — linear, V1, V2 — synchronous rotation coordinates, Z vertical |
| Workpiece body shape | Round, profile, flat-oval and oval pipes, angle, channel, beam / I-beam |
| X, Y, C coordinate drive type | Linear Drive |
| Drive type Z, V coordinates | Servo |
| Cartridge | 4-jaw, self-centering, with automatic clamping / unclamping |
| Outside diameter of processed round pipes (blanks) with installation in the chuck, (min..max), mm | 10 – 200, 10 — 500 |
| Length of pipes (blanks) installed in the chuck (min..max), mm | 500 — 6000 |
| Maximum length of the obtained workpiece, mm | 5800 |
| Supply voltage | ~ 380 ± 18%; 50 Hz; 3-phase |