Double Tool Punch Press
Two 75 ton punch cylinders each with two punch stations per hydraulic press allow the Anglemaster-643 to apply up to two different hole shapes/sizes per leg. This angle line can accommodate shaped holes such as squares, rectangles, obrounds and slots.
The Anglemaster-643 uses a single cut 230 ton shear press for the cutting to length angle and flat stock. A single cut shear mechanism eliminates the slug created by double cut shear mechanisms.
SignoScript Carbide Scribing
The SignoScript layout marking attachment eliminates human error in manual layout methods. Complete information is maintained throughout blasting, galvanizing and painting processes.
SignoMat Part Stamping
The SignoMat part stamping unit stamps at an unmatched 1 character per second with a depth of 1/32″ (.8 mm) and a total height of 1/2″ (12 mm). The unit holds up to 36 characters for complete part marking ability.
Nonstop Throughput with Roller Feed Technology
Equipped with the Peddinghaus Roller Feed measurement system, the Anglemaster-643 maximizes contact with the material at all times. This Roller Feed technology ensures a constant roll and an accurate measurement given deviations in material.
Infeed and Outfeed Material Handling
The infeed and outfeed material handling system, designed for continuous production, keeps the operator safe at all times. As drag chain conveyors move material to the infeed conveyors, power material advance initiates steel into the machine. Once sheared, drive rollers advance the finished parts to the unloading zone.
6" x 6" x 5/8"
|Punch stations per hydraulic press:||
5/8" Thick Angle and Flat Bar
75 Ton Punch Presses
1 character per second with a depth of 1/32" (.8 mm) and a total height of 1/2" (12 mm)