DEBITARE TABLĂ ȘI ȚEAVĂ
| Pipe diameter (standard) | 50 – 500 mm |
|---|---|
| Cutting length (Working length) | Basic length: 1.000 mm |
| Working width at Y-cantilever | ZINSER 1306 : ~ 500 mm (with one tool) |
| Equipment | 1 torch with height adjustment; Oxy-fuel / Plasma / Drilling |
| Option | Pipe support system consisting of a guide track and height adjustable dollie |
| Type of laser | Ytterbium doped fiber laser |
|---|---|
| Beam delivery | through fiber |
| Average lasing power (nominal value), W | 1000 — 4000 |
| Lasing / cutting mode | pulsed, CW |
| Lasing wavelength, nm | 1070 |
| Kinematic scheme | portal-type, work-piece is fixed/non-movable |
| Movement system | linear drive |
| Basic configuration of processing field size, mm | 1500×3000 |
| ositioning accuracy of coordinate Х,Y, mm | ±0.01 |
| Focus control system | non-contact, automatic |
| Cutting width, mm (depending on the thickness of the material) | (0,08-0,2) |
| Process gases used | oxygen, nitrogen, argon, compressed air |
| Data formats | DXF, DWG, G-code |
| Possible methods for loading data | the Internet, the local network, USB flash drive |
| Power supply | ~ 380 ± 18%; 50 Hz; 3-phase |
| Type of laser | Ytterbium fiber |
|---|---|
| Beam transmission | Through fiber |
| Focused radiation spot width | 0.07-0.15 mm |
| Average radiation power | 1000 — 6000 W |
| Kinematic diagram | Portal, the sheet is motionless |
| Sheet processing field size | 3000 × 1500; |
| Pipe processing area, mm | 6000×200; 6000×500 |
| Coordinate Axes | X, Y, C — linear, V1, V2 — synchronous rotation coordinates, Z vertical |
| Workpiece body shape | Sheet, round and shaped tube |
| X, Y, C coordinate drive type | Linear Drive |
| Drive type Z, V coordinates | Servo |
| Cartridge | 4-jaw, self-centering, with automatic clamping / unclamping |
| Maximum travel speed, m / min | 120 |
| Outside diameter of processed round pipes (blanks) with installation in the chuck, (min..max), mm | 10 – 200, 10 — 500 |
| Length of pipes (blanks) installed in the chuck (min..max), mm | 500 — 6000 |
| Maximum length of the obtained workpiece, mm | 5800 |
| Supply voltage | ~ 380 ± 18%; 50 Hz; 3-phase |
| Max. number of torch carriers: | max. 2 |
|---|
| Schneidbereich: | 3 – 60 mm / 100 mm |
|---|---|
| Gasarten: | Acetylen oder Propan |
| Brennereinstellung: | Seiten-, Höhenverstellung, Schrägstellung mit Winkelskala |
| Elektr. Antrieb: | Stufenlos regelbar |
| Vorschub" | 50 – 900 mm / min |
| Spurbreite: | 80 mm |
| Länge: | 300 mm |
| Gewicht: | ca. 9,5 kg |
| Spannung: | 230 VAC / 120 VAC / 42 VDC |
| Aufnahmeleistung: | 45 W |
| Schneidbereich: | 3 – 100 mm / 200 mm |
|---|---|
| Gasarten: | Acetylen oder Propan |
| Brennereinstellung: | Seiten-, Höhenverstellung, Schrägstellung mit Winkelskala |
| Elektr. Antrieb: | Stufenlos regelbar |
| Vorschub" | 50 – 900 mm / min |
| Spurbreite: | 150 mm |
| Länge: | 540 mm |
| Gewicht: | ca. 19,5 kg |
| Spannung: | 230 VAC / 42 VDC wahlweise |
| Aufnahmeleistung: | 45 W |
| Input voltage: | 230V / 120V, 50/60 Hz, 180 W, 0.5 A |
|---|---|
| Max. cutting area: | 3,000 x 1,500 mm |
| Max. cutting speed: | 3,000 mm/min |
| Cutting thickness oxy-fuel: | up to 100 mm |
| Cutting thickness plasma: | up to 35 mm |
| Total weight: | ~ 200 kg |
| Type of laser | Ytterbium fiber |
|---|---|
| Beam transmission | Through fiber |
| Focused radiation spot width | 0.07-0.15 mm |
| Average radiation power | 1000 — 5000 W |
| Kinematic diagram | Portal, the sheet is motionless |
| Pipe processing area, mm | 6000×200; 6000×500 |
| Coordinate Axes | X, Y, C — linear, V1, V2 — synchronous rotation coordinates, Z vertical |
| Workpiece body shape | Round, profile, flat-oval and oval pipes, angle, channel, beam / I-beam |
| X, Y, C coordinate drive type | Linear Drive |
| Drive type Z, V coordinates | Servo |
| Cartridge | 4-jaw, self-centering, with automatic clamping / unclamping |
| Outside diameter of processed round pipes (blanks) with installation in the chuck, (min..max), mm | 10 – 200, 10 — 500 |
| Length of pipes (blanks) installed in the chuck (min..max), mm | 500 — 6000 |
| Maximum length of the obtained workpiece, mm | 5800 |
| Supply voltage | ~ 380 ± 18%; 50 Hz; 3-phase |
| Track width (C): | 1.685 – 4.685 mm (in 500 mm steps) |
|---|---|
| Working width (A): | with 1 torch: C -750mm |
| Machine width (D): | C + ~300 mm |
| Machine lenght (E): | Working length (B) + 1.800 mm |
| Max. number of torch carriers: | max. 2 |
| Cutting thickness: | depends on laser system |
| Drive: | AC – servo drives |
| Input voltage | 400 V / 50 Hz |
| Cutting speed: | up to 18,000 mm / min (depending on laser system) |
Categorii
- FIERĂSTRAIE DEBITAT METAL (39)
- DEBITARE 90° (18)
- AUTOMAT (10)
- SEMIAUTOMAT (8)
- DEBITARE UNGHIULARĂ (21)
- AUTOMAT (7)
- SEMIAUTOMAT (14)
- DEBITARE 90° (18)
- PRELUCRARE PROFILE ȘI OȚEL STRUCTURAL (20)
- DEBITARE TABLĂ ȘI ȚEAVĂ (18)
- DEBITARE TABLĂ (15)
- DEBITARE ȚEAVĂ (2)