High-speed CNC plate processor for heavy steel plate up to 100 mm thick, combining carbide drilling, milling and plasma/oxy-fuel thermal cutting. Features bevel cutting and a 12-station tool changer.
| Maximum plate thickness | 4 in (100 mm) |
|---|---|
| Maximum plate width (oxy-fuel) | 10 ft (3 m) |
| Spindle motor | 48 HP (36 kW) Siemens |
| Maximum spindle speed | 2250 RPM |
| Maximum drill diameter | 3 in (76 mm) |
| Plasma bevel | Up to 45° at 2-1/4 in |
| Oxy-fuel bevel | Up to 4 in |
| Tool changer | 12-station |
| Clamping pressure | 12 tons |
| Part stamping | SignoMat, 1/2 in characters, 36-character magazine, 1 char/sec |
| Measurement system | Roller Feed Measurement |
| Throughput | ~1 t/h up to 1 in; ~2 t/h above 1 in |
| Additional operations | Face/end milling, blind and full tapping, countersinking, scribing |
| Lubrication | Minimum Quantity Lubrication (MQL) |
| Nesting software | SDS (edge start and common line cutting) |
The HSFDB-C is Peddinghaus's high-speed answer to high-volume heavy plate production, handling steel plate up to 100 mm thick and roughly 3 m wide. Its 36 kW (48 HP) Siemens spindle motor reaches speeds up to 2250 RPM and drills holes up to 76 mm in diameter while also face milling, end milling and tapping. Thermal cutting is available in both plasma and oxy-fuel, with bevel cuts up to 45 degrees, and the roller-feed measurement system combined with about 12 tons of clamping pressure delivers high repeatability. The CNC control drives a 12-station tool changer, minimum-quantity lubrication and integrated part stamping and marking. Typical throughput is around one ton per hour on material below 25 mm and two tons per hour above 25 mm.
Peddinghaus HSFDB-C plate processor is a strong fit for teams evaluating Peddinghaus machines and looking for a practical choice with clear technical positioning and straightforward production integration.
